Licensed Professional Engineer stormwater quality inspections for residential, commercial, and development projects across Texas. We provide PE-stamped stormwater quality inspection reports for TCEQ Construction General Permit compliance, post-construction BMP inspections, MS4 stormwater compliance, and SWPPP verification to keep your project compliant with local and state stormwater regulations.
Possible deliverables
Depending on the agreed scope, deliverables that may be included are listed below.
When a stormwater quality inspection may be needed
Stormwater quality inspections may be needed for post-construction BMP compliance, MS4 stormwater requirements, TCEQ Construction General Permit inspections, and ongoing facility stormwater compliance. ALFA's licensed engineers perform stormwater quality inspections and prepare PE-stamped inspection reports.
Stormwater quality inspections are distinct from construction SWPPP inspections, drainage design, and stormwater permit renewal. Construction SWPPP inspections verify active construction-site erosion and sediment controls; drainage design prepares construction plans; and permit renewal is a separate regulatory filing. Stormwater quality inspection services included in your proposal are only those stated in the proposal.
Project steps
- 1Records review — ALFA reviews the facility's stormwater permit, previous reports, BMP records, and any agency or MS4 notices.
- 2Site inspection — a licensed engineer inspects the stormwater BMPs and documented conditions.
- 3Reporting — a PE-stamped inspection report documents observed conditions, maintenance needs, and compliance findings.
- 4Coordination — ALFA reviews findings with the owner; the reviewing authority makes the final compliance determination.
Inspection frequency is set by the applicable permit and the reviewing authority, and is not the same for every facility or location. ALFA does not assume a single inspection frequency applies throughout Texas. Confirm the required inspection schedule for your facility with the applicable permit and authority. ALFA does not guarantee permit compliance or inspection outcomes.
Information needed for a quote
- Property address
- Facility type and use
- Existing stormwater permit or registration (if any)
- Previous inspection reports (if any)
- BMP information (type, location, as-built drawings)
- Agency or MS4 notices (if any)
You don't need all of these to start the conversation. Share what you have and ALFA will help identify what else is needed for your proposal.
Availability: Stormwater quality inspections require a site visit. Site-visit availability depends on project location — contact us to confirm coverage for your area. Engineering design services are available statewide.
How to Request a Proposal
Use the button below to request a proposal. Describe your project, site address, and any specific concerns or requirements.
Related Engineering Services
Stormwater Quality Permit Renewal
Stormwater quality permit renewal inspections and reporting.
SWPPP Preparation
Construction SWPPP preparation and TCEQ Construction General Permit support.
Drainage Design
Site drainage and stormwater conveyance design.
Erosion & Sediment Control
Erosion and sediment control plans for construction sites.